CLM ™ REPEATER

1. You may need to replace the batteries. To check the batteries level, go to your app and check level.
2. The device may not communicate properly with the HUB. Make sure that there isn’t a metal cabinet which may interfere between the HUB and the device.

You will need a repeater when there is communication problem between one or more end devices with the Hub

You will find the location to install repeater using the application when the RSSI of the device and the repeater are good, also you need to make sure that there is power outlet near the location.

No, you must install the repeater indoor.

You must install 2 x AAA batteries . Batteries must be replaced every 2 years.

Yes, Triple+ products are supplied with all needed equipment

You should replace the batteries in the repeater after power outage, or every 2 years.

You not need any tools to open the repeater batteries  case, just slid up the repeater and the batteries case will open.

Yes, you can the status for each CLM device in your application

Yes, all CLM products have backup batteries

Yes, All CLM products are cloud based

TECHNICAL SUPPORT

Please browse for specific issue or solution at our troubleshooting .
If you still can’t find the answer to your question-
Triple+ provides comprehensive 24/7 technical support services.

Email: support@tripleplus.io

OR

leave us your details and someone will get back to you within 24 hours